Outdoors

Please insure that the floor is clean, dry and dust free.

Tools required : - Soft Lint Cloth & Domestic Hair Dryer

Step (1) - Locate the floor graphic in the position on the floor..

Step (2) - Once you are happy with the position of the graphic. Turn the graphic over (face down) and begin to peel the backing paper from the graphic; about half the way.

Step (3) - Turn the graphic back over and locate in position on the floor; but don't smooth it down just yet.

Step (4) - Take your cloth and working from the centre of the graphic (where you have removed the backing paper from) make firm outward strokes; overlapping each stroke making sure not to trap any pockets of air. At this point you may find it necessary to warm the graphic to soften the vinyl to follow the contour of the flooring; being careful not to damage the vinyl.

Step (5) - With the first half of the graphic applied to the floor. You can now begin to gently pull the backing paper from the other half of the graphic ensuring that the graphic does not touch the floor. Fold the graphic over but don't crease it.

Step (6) - Fold the graphic back over and again working from the centre use outward overlpapping strokes as you did in STEP 4 until the floor sticker is fully laid with no creases or pockets of air.

We recommend the graphic is not walked on for 8 - 12 hours so the adhesive can fully key to the floor area and is not cleaned with any WAX based polishes.